When it comes to the bathroom, everyone knows that it is the place where we take a bath. However, everyone also knows that the bathroom is a place that is often exposed to water, that is, a humid place, so special attention should be paid when decorating. If you are laying ceramic tiles If not handled properly at the time, hollowing or even falling off may occur later. Therefore, what Zhongtaojun wants to share with you today is about bathroom tiles. Take it, here are the tips to make the bathroom more durable. We are going to Let’s take a look!
1. Tiles soaked in water
Ceramic tiles have water absorption. When laying tiles, they must be soaked in water first to allow the tiles to absorb water before being laid. The base layer of the wall also needs to be watered to ensure that the tiles are fully saturated with moisture. If it is not soaked in water, the tiles will absorb the moisture in the mud, causing the mud to condense quickly, affecting the adhesive force of the mud, and the tiles will easily fall off later. Therefore, tile soaking and wall watering are steps that cannot be ignored.
2. Grassroots roughening
In order to increase the adhesion of the base surface, the base layer must be roughened before laying ceramic tiles in the bathroom to prevent the tiles from hollowing or even falling off in the future. This step is indispensable and is closely related to the later adhesion of the tiles and preventing them from falling off.
3. Clean the base surface
During the decoration process, the walls and floors will be more or less stuck with dirt such as lime plaster, tile glue, and wallpaper. These can reduce the adhesion between the mud and the base layer, so they must be cleaned. Then proceed to paving. In addition, you should also pay attention when paving. If the wall is cracked, you must repair the wall first; if the tiles are cracked, discard them. Both of these reasons can cause the tiles to fall off later.
4. Elastic thread
If you want the tiles to be laid evenly, vertically and aesthetically, you can find the vertical line before laying and use the vertical line as the benchmark for construction; in addition, before the operation, play elevation control lines around the wall and cross lines on the ground. , to control the distance between tiles.
5. Pre-tiled tiles
There are various types of ceramic tiles, and the techniques such as color and texture are becoming more and more familiar. There will be rich textures and colorful tones on the surface of ceramic tiles. Therefore, before formal paving, based on the drawing design requirements, pre-paving should be carried out according to texture and color, and the color and texture should be matched well to achieve the best effect. At the same time, pre-paving can also pick out uneven tiles to prevent later rework. With little or no rework, the probability of ceramic tiles falling off is naturally greatly reduced.
6. Tile paving
Paving ceramic tiles is a skill that tests skills. First, the mud must be properly mixed (1:3 dry hard mud), and then applied evenly on the back of the tiles. After the paving is completed, tap the surface of the ceramic tile with a vertical hammer to discharge the air bubbles of the mud to achieve a tight and smooth effect to prevent hollowing in the later stage.
7. Hooking
After laying the tiles and letting them stand for 24 hours, it is necessary to perform jointing treatment to clean up the impurities in the gaps between the tiles and then use a seaming agent to joint them.
So when laying bathroom tiles, you should pay attention to the above 7 tips. Doing the above can make the bathroom tiles more durable! The above content is related to the topic shared by Zhongtaojun: Here, here are the tips to make bathroom tiles more durable. Hehehehe, by the way, there is another important thing about bathroom tiles. The key point is that it is anti-slip!
