Ceramic tiles have always been one of the first choice decoration materials when decorating a house. Therefore, when decorating a house, we usually ask a master decorator to lay the tiles or a master decorator who specializes in this line of work to lay the tiles. Ceramic tiles, then let’s take a look at today’s topic: What should be paid attention to when accepting ceramic tiles!
The editor has sorted out the things that need to be paid attention to after the ceramic tiles are laid, mainly focusing on the four words of seeing, listening, asking, and cutting. Let’s take a look at them separately!
1. Look
1. Check whether there are any missing edges, falling corners, or falling porcelain. In addition to the quality factors of the product itself, you should also pay attention to the protection of the finished product after construction
2. The seams between the two ceramic tiles at the sun corners should be chamfered at 45°, otherwise the overall appearance will be affected.
3. The gaps between bricks should be even and flush. Too big or too small will not look good. Usually many masters will use toothpicks to control the spacing when paving.
4. There are many pipelines in the kitchen and bathroom, and we often encounter the problem of drilling holes in the ceramic tiles. Therefore, during the acceptance inspection, you can focus on checking whether the size of the hole is correct and whether the corners are smooth.
5. When applying tiles, focus on whether the joints between the patterns are natural and smooth, and whether there are any problems with misplaced or uneven tiles.
2. Listen
Knock the surface of the ceramic tiles with your hands or a drum hammer. The sound of the tiles that have been laid properly is dull. On the contrary, the tiles are hollow and will easily fall off in the future. Knock them off. This method is used to check whether the tiles are hollow. .
Three questions
1. Soaking time: The tiles must be soaked in water before laying. The soaking time depends on its density. When accepting the ceramic tiles, you can ask the master how long they have been soaked. Generally, it is better if there are no blisters in the basin, about 2 hours is better.
2. Loss: The loss of ceramic tiles is related to its quality, workmanship, and room type. Generally, the normal loss rate is 5-10%. The larger the size, the greater the loss.
Four. Cut
1. Flatness
Use a 2M ruler and place it in a horizontal position, then insert a feeler gauge into the raised area, and take a reading from the feeler gauge. Generally speaking, it is normal if it does not exceed the acceptance standard of 2 mm.
2. Water slope
There will be water on the kitchen and bathroom floor, so there must be a certain slope when paving it. The tiles next to the floor drain need to be tightly adhered. During acceptance, a water pouring test can be done to see whether the water flow and drainage speed are smooth and unobstructed.
After reading the above content, you can try this method next time you check whether the ceramic tiles are good or not! The above content is what the editor will share with you today about matters that need to be paid attention to when accepting ceramic tiles. I hope it will be helpful to you!
